|
|
|
|
 |
, March 2010 The Rinspeed UC? - urban commuter, you see? - is an electric driven city car. Thanks to a railcar loading system also long distances can be travelled easily. As in the ten years before, ESORO was in charge for the development of this showcar. It will be presented during the 80th Geneva Motor Show (March 4th - 14th, 2010). > Find out more here |
||
|
|||
|
 |
, March 2009 The Rinspeed iChange is a "1-2-3 Seater" with a 130kW-E-Motor, whose car body adapts by the push on a button and with best possible aerodynamics to the number of passengers. This way the sportster with a central driver seat converts into a small sports-van with space for three people through the adjustable tail-end. The 10th Showcar realized by ESORO for Rinspeed will be been shown from the 5th to the 15th March 2009 at the Geneva Motor Show. > Find out more here |
|
|
|||
|
 |
, July 2008 In a time of only 1:14.33 hours, the amphibious car Tonic crossed the Channel from Dover to Calais. By doing so, the Tonic beats the record of Sir Richard Branson for road-approved amphibious vehicles. The Tonic was developed and realized by ESORO as tender for the PINK GIN sailing yacht. > Find out more here |
|
|
|||
|
 |
, May 2008 The journal "Polymotive" - a renowned magazine in the plastic sector of the automotive industry - published in its May / June issue an interview with the CEO of ESORO, Diego Jaggi, on the development of the smart fortwo tailgate and the E-LFT process. The article as >  PDF |
|
|
|||
|
 |
, April 2008 During the JEC Show - the world's largest fair for fiber reinforced plastics - ESORO and Weber Automotive were awarded first prize for the E-LFT-produced tailgate of the new smart fortwo in the category "Automotive & Vehicles". Find out more about the > E-LFT Process > Award |
|
|
|||
|
 |
, February 2008 James Bond still needed "Q" and a box of movie tricks in 1977, today it also works in real life: the Rinspeed sQuba - a thoroughbred electro-sportscar - can, if necessary, swim and dive to depths of up to 10 meters. The 9th Showcar realized by ESORO for Rinspeed has been shown at the Geneva Motor Show 2008. > Find out more |
|
|
|||
|
 |
, January 2008 In 2007, WeberFibertech delivered 100,000 structural parts and inside lids for the tailgate of the new smart fortwo. The components and the E-LFT production process were developed by ESORO for WeberFibertech. > Find out more |
|
|
|||
|
 |
, December 2007 The ESORO H301 - a plug-in hybrid - has been driven over 70,000 km since its conception 10 years ago. In late 2007 it was equipped with state-of-the-art LiIon technology. The vehicle became around 100 kg lighter, whereas the battery capacity was increased by around 30%. > Find out more |
|
|
|||
|
 |
, February 2007 The transparency – thanks to Bayer's material Makrolon® – „dematerializes“ the new Rinspeed concept car eXasis. The 8th Shwocar realized by ESORO for Rinspeed is shown at the Geneva Motor Show from March 8 - 18, 2007. More information: rinspeed.ch and bayer.de |
|
|
|||
|
 |
, January 2007 In March 2007, the new smart fortwo is available – including the lightweight tailgate produced in E-LFT production process. smart was convinced by the higher structural properties and higher customer value at competitive costs. Weber Fibertech is now delivering daily 400 parts engineered by ESORO. More information: weber-fibertech.com |
|
|
|||
|
|
, January 2007 |
|
|
|||
 |
February 2005 The latest Project by the Swiss design company Rinspeed is called "ZaZen" and was developed by ESORO and Bayer MaterialScience. The Concept Car featuring innovative lighting technology and novel roof design will be presented on February 28, 2006, at the Geneva Motor Show. More information: rinspeed.ch and bayer.de |
||
|
|||
|
 |
October 2005 On the occasion of RehaCare 2005 - the leading trade fare for rehabilitation products - our customer Otto Bock GmbH presented the pre-production models of the outdoor wheelchair SuperFour. The vehicles, developed and manufactured by ESORO, could be tested by the visitors of the fair on a specially built all-terrain course. |
|
|
|||
|
 |
October 2005 The Paragolfer is an all-terrain wheelchair, that enables people to stand upright. This enables them to play golf and to communicate on eye height. The Paragolfer was developed to series production readiness by ESORO together with Otto Bock GmbH according to a concept of Anthony Netto und Christian Nachtwey for Parabasetec. |
|
|
|||
|
 |
- June 2005 |
|
|
|||
|
|||
|
 |
, March 2005 ESORO was certified according to ISO 9001:2000 by the Swiss Association for Quality and Management Systems (SQS). SQS is worldwide recognized and the leading organisation in Switzerland for assessment and certification services. The certificate covers the entire business area of ESORO, including the production of thermoplastic composite parts for the automotive market. |
|
|
|||
|
 |
, March 2005 Lateral thinking, looking at things from a new angle, thinking out of the box and feeding the senses – sight, touch, feel, smell and hearing – these are major elements of the development work that has gone into the "Rinspeed Senso". > Find out more |
|
|
|||
|
 |
September 2004 The Superfour is the first outdoor wheelchair featuring all wheel drive. On September 20, the project was presented during the Paralympic Games in Athens. ESORO is very pleased to have been selected for realizing the Superfour for Otto Bock, a leading supplier of orthopedic and rehabilitation systems worldwide. > Find out more |
|
|
|||
|
 |
August 2004 Albert Weber / ESORO have accepted the first order for a serial component in E-LFT. E-LFT is a patented production process, developed by ESORO for Albert Weber GmbH. It allows the cost-efficient production of fiber-reinforced thermoplastic components in large volume production (30’000 - 300’000 units/year). |
|
|
|||